Here is a nice replacement kick up rudder assembly for your Holder 14. This one has a mahogany rudder and tiller, aluminum cheek plates, and a stainless steel kick up rod. It is designed very similar to the original equipment. I have shown two pictures of a cut away of the assembly to show the mechanism. Some people prefer to use lines to lift and hold down the rudder. I can do this too. A good example of this is shown on the Holder 12 item on this site. I finish the wood with a minimum of 3 coats of Interlux spar varnish. Pintles will be installed at locations to match your boat. Please contact me to verify locations as all boats do not have gudgeons in the same locations.