‘Sunfish & Other Fish’ Category

We now have a stainless steel hold down clip for your Sunfish and other daggerboards

$11 including shipping cost.

ATTENTION: If you live outside the lower 48 United States please contact us directly to discuss shipping options (i.e. Alaska/Hawaii/International).

Beautiful mahogany Sunfish Daggerboard. Brand new! This is a custom made sunfish style daggerboard with feathered edges for improved hydrodynamic flow. This fits the Sunfish and may also fit other similar sailboats. The Daggerboard measures 9.5″ x 45 .5″ x 3/4″ and is made from one piece mahogany.  This board is the exact board currently included by the manufacturer in many of their recreational Sunfish.  I know this because I make them.  It must be held in place with clip, not included, like older boards.  Weighted board available at additional cost.  Contact us for more info.

The blade is finished with 3 coats of Interlux Spar Varnish.

I usually have these in stock

I promise you will like this one.

$159.00 plus shipping

ATTENTION: If you live outside the lower 48 United States please contact us directly to discuss shipping options (i.e. Alaska/Hawaii/International).

Brand new and Improved!                                                     

This is a custom made Sunfish style rudder blade with feathered edges for improved hydrodynamic flow. To prevent splitting on impact, I glue in 1/4″ dowel pins on the leading edge.

Rudder fits Sunfish and several other similar sailboats. It measures 9.5″ x 28″ x 3/4″.

Blade is finished with 3 coats of Spar Varnish. Other finishes available on request.

This is “blade only”—No hardware.

$139.00 plus shipping

In stock ready to ship

 

ATTENTION: If you live outside the lower 48 United States please contact us directly to discuss shipping options (i.e. Alaska/Hawaii/International).

Here is a nice older style daggerboard for your Sunfish.  The board pictured is made from laminated locking glue jointed cypress but most boards I now do with mahogany.  It is finished with a minimum of 3 coats of spar varnish.  Metal hold down clip not included.  The lock jointed cypress is still available if requested.

$159.00

ATTENTION: If you live outside the lower 48 United States please contact us directly to discuss shipping options (i.e. Alaska/Hawaii/International).

starfish-daggerboards-004-640x480starfish-daggerboards-002-640x480This is a custom made Starfish style dagger board built to be close to an exact copy of the factory board.

Rudder fits Starfish and several other similar sailboats. It measures 40 1/2″ x 9″ 1/2? x 3/4″  and is made of mahogany although the picture is of one made from cypress.

Blade is finished with a minimum of 3 coats of Spar Varnish. Other finishes available on request.

This is “blade only”—No hardware.  Spring clip available at additional cost.

$159.00 plus shipping

Beautiful mahogany tiller with extension for Starfish sailboat.  Will also fit Sailfish and other small sailboats.  Finished with 3 coats of spar varnish.

 

 

$65  plus shipping

This is a custom made Starfish style rudder blade with feathered edges for improved hydrodynamic flow. To prevent splitting on impact, I glue in 1/4? dowel pins on the leading edge.

Rudder fits Starfish and several other similar sailboats. It measures 8? x 24? x 3/4? and the one shown is made of “edge-locked” cypress which is very stable but my standard now is mahogany but cypress is still available on request for the same price.

Blade is finished with 3 coats of Spar Varnish. Other finishes available on request.

This is “blade only”—No hardware.

$139.00 plus shipping

 

SAILFISH RUDDER CYPRESS

Brand New and Improved!
This is a custom made sailfish style rudder blade with feathered edges for improved hydrodynamic flow. It has 1/4″ dowel pins glued in on the leading edge to prevent splitting on impact. This rudder fits the Sailfish and several other similar sailboats.

8.75″ x 24.5″ x 3/4″ — The rudder shown is made of “edge-locked” Cypress which is still available on request but the standard blade is now made from mahogany. Blade is Finished with 3 coats of Spar Varnish.

This rudder is “blade only.” No hardware is included.

$139.00 plus shipping