J.O. Woodworks » Custom Boat Parts

Holder 12 Rudder Assembly

admin — Wed, 10 Feb 2010 01:59:22 +0000

Here is a replacement kick up rudder assembly with mahogany rudder and tiller and aluminum cheek blocks. Board is weighted to help with holding it down. Lines are used to raise and lower the rudder. This is also available with the mechanical kick up mechanism similar to the original. This can be seen on the Holder 14 rudder I have on this site.

$250.00

Holder 14 Kick Up Rudder Assembly With Tiller

admin — Tue, 09 Feb 2010 17:47:29 +0000

Here is a nice replacement kick up rudder assembly for your Holder 14. This one has a mahogany rudder and tiller, aluminum cheek plates, and a stainless steel kick up rod. It is designed very similar to the original equipment. I have shown two pictures of a cut away of the assembly to show the mechanism. Some people prefer to use lines to lift and hold down the rudder. I can do this too. A good example of this is shown on the Holder 12 item on this site. I finish the wood with a minimum of 3 coats of spar varnish. Pintles will be installed at locations to match your boat. Please contact me to verify locations as all boats do not have gudgeons in the same locations.

$250.00

O’day 25 Hatch Boards

admin — Tue, 09 Feb 2010 02:24:22 +0000

Beautiful mahogany hatch boards for O’day 25. Finished with a minimum of 4 coats of Cetol. Other finishes and woods available. Contact us for custom quote on your boat. Please note that all hatches require a template furnished by boat owner as dimensions vary slightly from boat to boat.

$150 plus shipping

O’Day 25 Rudder

admin — Mon, 08 Feb 2010 17:27:18 +0000

Here is a nice replacement rudder for your O’Day 25 sailboat. It is made from laminated cypress for a very strong and stable product. I will drill as many or as few holes for hardware as you want. Finished with a minimum of 3 coats of spar varnish.

$275.00

West Wight Potter 15 Tiller

admin — Sun, 07 Feb 2010 16:59:58 +0000

Here is a nice replacement tiller for your Potter 15. It is laminated from beautiful ash and either black walnut or mahogany and then coated with a minimum of 3 coats of spar varnish. This is typically shipped with no holes drilled for attachment. I can do this for you at no charge. Just give me your requirements.

$79.00

Potter 15 Kick up Rudder Assembly With Tiller

admin — Sun, 07 Feb 2010 16:53:14 +0000

Here is a nice wood kick up rudder assembly for your Potter 15. The rudder is made from 3 layers of okoume laminated together and weighted internally to work perfectly for you. The cheek and head assembly is also made from okoume finished with a minimum of 3 coats of spar varnish. The rudder is coated first with epoxy for added strength and impact resistance and covered with a minimum of 3 coats of spar varnish. The tiller is laminated from ash and either black walnut or mahogany and then covered with a minimum of 3 coats of spar varnish. Pintles not included.

$275.00

Daysailer Boom Support

admin — Sat, 06 Feb 2010 16:36:33 +0000

This is the perfect addition to your boat. Put this at the aft end of the cockpti to support the boom and now it will be possible to use a boom tent. Protected with a minimum of 3 coats of spar varnish.

$50.00

Montgomery 17 Tiller

admin — Fri, 05 Feb 2010 23:30:16 +0000

Beautiful Tiller for the Montgomery 17 laminated from ash and either black walnut or mahogany. Finished with a minimum of 3 coats of spar varnish. Typically I do not drill the holes in the tiller but upon request they can be drilled to your specifications at no charge. Just let me know.

$89.00

Montgomery 17 Kick Up Rudder With Tiller

admin — Fri, 05 Feb 2010 23:05:58 +0000

This is a beautiful kick up rudder assembly for a Montgomery 17. The rudder is laminated cypress and the tiller is laminated with ash and black walnut. Tiller also available in other combinations of woods. The hold down line is secured with a “Clam Cleat” CL 257 auto release cleat so that it will release and let the rudder kick up out of the way if you hit something. Pintles are not included so that you can install the size you need at the locations that fit you boat.

$360.00

Montgomery 15 Tiller

admin — Fri, 05 Feb 2010 16:45:09 +0000

Here is a nice replacement tiller for your Montgomery 15. It is laminated from ash and either black walnut or mahogany. Other woods are also available on request. We have many very attractive exotic woods on hand to make yours a one of a kind tiller. Tiller is typically shipped with no hole drilled for attachment. I can drill the hole for you if you specifiy the size and location.

$89.00