Beautiful Sunfish Daggerboard. Brand new! This is a custom made sunfish style daggerboard- centerboard with feathered edges for improved hydrodynamic flow. The Board fits the Sunfish and may also fit other similar sailboats. The Daggerboard measures 9.5″ x 45 .5″ x 3/4″ and is made of “edge-locked” Cypress for strength and stability.  This board is shaped like new board but must be held in place with clip, not included, like older boards.  Weighted board available at additional cost.  Contact us for more info.

This board will not warp as many do. Its blade is finished with 3 coats of Spar Varnish. Older style sunfish daggerboard also available at same price.

I promise you will like this one.

$139.00 plus shipping

Brand new and Improved!

This is a custom made Sunfish style rudder blade with feathered edges for improved hydrodynamic flow. To prevent splitting on impact, I glue in 1/4″ dowel pins on the leading edge.

Rudder fits Sunfish and several other similar sailboats. It measures 9.5″ x 28″ x 3/4″ and is made of “edge-locked” cypress for strength and stability.

Blade is finished with 3 coats of Spar Varnish. Other finishes available on request.

This is “blade only”—No hardware.

$99.00 plus shipping

Here is a nice older style daggerboard for your Sunfish.  This board is made from laminated locking glue jointed cypress.  This board won’t warp like so many of the older solid mahogany boards.  It is finished with a minimum of 3 coats of spar varnish.  Metal hold down clip not included.  I do have these available if needed.

$139.00

Nicely shaped mahogany daggerboard.  This board is weighted to stay down in the boat.  A hole for a tie line is provided so you don’t lose the board.

$149.00

Porpoise II Kick up rudder.  This rudder is made from lock jointed cypress to prevent warping.  Aluminum cheekplates with stainless steel hardware.   Tiller is mahogany.  All finished with 3 coats of spar varnish. 

$250 Plus Shipping

Go retro with an old style economical tiller.  This tiller fits the current production rudder head perfectly.  Available in either mahogany or ash for the same price.  Just send me an email to confirm which wood you prefer.

$40

This is a custom made Starfish style dagger board built to be close to an exact copy of the factory board.

Rudder fits Starfish and several other similar sailboats. It measures 40 1/2″ x 9″ x 1/2″ x 3/4″  and is made of “edge-locked” cypress for strength and stability.  Mahogany also available.

Blade is finished with 3 coats of Spar Varnish. Other finishes available on request.

This is “blade only”—No hardware.  Spring clip available at additional cost.

$139.00 plus shipping

Beautiful mahogany tiller with extension for Starfish sailboat.  Will also fit Sailfish and other small sailboats.  Finished with 3 coats of spar varnish.

$45  plus shipping

This is a custom made Starfish style rudder blade with feathered edges for improved hydrodynamic flow. To prevent splitting on impact, I glue in 1/4″ dowel pins on the leading edge.

Rudder fits Starfish and several other similar sailboats. It measures 8″ x 24″ x 3/4″ and is made of “edge-locked” cypress for strength and stability.

Blade is finished with 3 coats of Spar Varnish. Other finishes available on request.

This is “blade only”—No hardware.

$99.00 plus shipping

CUSTOM DESIGNED KICK UP RUDDER AND TILLER FOR YOUR GUPPY 13.   BLADE IS MADE FROM LOCK JOINTED CYPRESS WITH A MINIMUM OF 3 COATS OF SPAR VARNISH.  ALSO AVAILABLE IN MAHOGANY.  TILLER IS LAMINATED FROM ASH AND MAHOGANY AND FINISHED WITH A MINIMUM OF 3 COATS OF SPAR VARNISH.  CHEEK PLATES ARE ALUMINUM.  STAINLESS STEEL AVAILABLE AT AN ADDITIONAL COST. 

$295.00  PLUS SHIPPING