Here is a nice replacement blade for your Monte 15 Kick up rudder assembly.  This one is made from glued up cypress to create a very strong and stable blade.  This one won’t warp like so many solid blades do over time.  Cypress is an American boat building wood that has been used for years.   This is finished with a minimum of 3 coats of spar varnish.

$110.00

Here is a nice mahogany replacement blade for your Monte 15 kick up rudder assembly.    This is finished with a minimum of 3 coats of spar varnish.  A complete kick up assembly is also available.  Contact us for details.

$125.00

Here you go.  A nice mahogany drop hatch for your Monte 17.  This has a vent cut into it covered with fiberglass screen cloth to keep out the bugs.  Finished with a minimum of 4 coats of Cetol.  Other woods available on request.  Please note that all hatches require a template furnished by boat owner as dimensions vary slightly from boat to boat.

$165.00

Here is an aftermarket daggerboard/ centerboard for your Dolphin Sr. sailboat.  This one is made from beautiful mahogany.  It is weighted to make sure it stays in the water and doesn’t float up on you.

$179

Here is an aftermarket daggerboard/ centerboard for your Dolphin Sr. sailboat.  This one is made from laminated locking glue jointed cypress.  It’s not going to warp on you.  I promise!

$169

Here’s a rudder to replace your lost or damaged rudder for you Dolphin Sr. Sailboat.  It is available in either a natural finish or high strength marine polyurethane.  Just let me know which you prefer.  Either board is made from locking glue jointed cypress and then covered in fiberglass for extra strength.  The fiberglass is not noticable in either board.  You’ll like this one.

$109.00

Here it is by popular request.  A nice ash tiller with extension for your Dolphin Sr.  Now you can replace that worn out, broken, or lost tiller.  Finished with a minimum of 3 coats of spar varnish and predrilled to fit the original rudder head, all you do is bolt it on and you’re ready to go sailing again!

$45.00

Beautiful Sunfish Daggerboard. Brand new! This is a custom made sunfish style daggerboard- centerboard with feathered edges for improved hydrodynamic flow. The Board fits the Sunfish and may also fit other similar sailboats. The Daggerboard measures 9.5″ x 45 .5″ x 3/4″ and is made of “edge-locked” Cypress for strength and stability.  This board is shaped like new board but must be held in place with clip, not included, like older boards.  Weighted board available at additional cost.  Contact us for more info.

This board will not warp as many do. Its blade is finished with 3 coats of Spar Varnish. Older style sunfish daggerboard also available at same price.

I promise you will like this one.

$139.00 plus shipping

Brand new and Improved!

This is a custom made Sunfish style rudder blade with feathered edges for improved hydrodynamic flow. To prevent splitting on impact, I glue in 1/4″ dowel pins on the leading edge.

Rudder fits Sunfish and several other similar sailboats. It measures 9.5″ x 28″ x 3/4″ and is made of “edge-locked” cypress for strength and stability.

Blade is finished with 3 coats of Spar Varnish. Other finishes available on request.

This is “blade only”—No hardware.

$99.00 plus shipping

Here is a nice older style daggerboard for your Sunfish.  This board is made from laminated locking glue jointed cypress.  This board won’t warp like so many of the older solid mahogany boards.  It is finished with a minimum of 3 coats of spar varnish.  Metal hold down clip not included.  I do have these available if needed.

$139.00